Blisters of Veneer Wood

¶ Blisters of Veneer Wood. When the glue under veneer lets go and the thin plywood blisters up it can often be secured back in place by heating the old case knife blade and rubbing it over the blister repeatedly. If the blister is near the edge of a flat board lift it up and insert a thin coating of first class wood glue with a flat stick, knife or toothpick. Then clamp the veneer down or place a board on it with a heavy weight on top for at least 12 hours. The glue alone without the clamp or weight will not hold it.

Next Page: Chipped Wood, Knot Holes, Deep Splits.